show voip register

This command displays registration status of users.

Syntax

show voip register {account|board|db sbc|ports|suppserv gw|user-info}

Command

Description

account {gw|sbc}

Displays registration status of user Accounts (Accounts table).

gw: Gateway accounts
sbc: SBC accounts)

board

Displays registration status for the entire gateway.

db sbc {list|user}

Displays SBC users registered with the device:

list: Displays the status of all registered SBC users, showing their AOR and Contact
user <AOR>: Displays detailed information about a specific registered SBC user (AOR)

The output displays the following:

"UserInfo Contact" if the contact is configured in the device's User information table
"Not-Active" if user currently not registered
"IPG" - IP Group to which user is classified
"SI" - SIP Interface associated with user
"ID" - internal identification number used for debugging
MOS measurements:
"LastMOS" - last call MOS score, timestamp and color ("N/A" means no calls during intervals)
"AvgMOS" - average MOS over 12 intervals and color ("N/A" means no calls during intervals)
"MinMOS" - minimum MOS over 12 intervals and color ("N/A" means no calls during intervals)

Note: The command is applicable only to the SBC application.

ports

Displays registration status of the devices' ports.

Note: The command is applicable only to the Gateway application.

suppserv gw [list]

Displays the number of users in the Supplementary Services table.

list: Displays detailed information about users, including registration status (REGISTERED / NOT REGISTERED.

Note: The command is applicable only to the Gateway application.

user-info {gw|sbc} [list]

Displays registration status of users in the User Info table.

gw: Displays total number of Gateway users.
list: Displays detailed information about users, including registration status - REGISTERED / NOT REGISTERED.
sbc: Displays total number of SBC users.
list: Displays detailed information about users, including registration status - REGISTERED / NOT REGISTERED.

Command Mode

Basic and Privileged User

Notes

The output of show voip register db sbc list displays up to the first 500 users.

Example

Displaying registration status of SBC users of AOR "1111":
show voip register db sbc user 1111

*** SBC Registered Contacts for AOR 1111 ***

===============================================================
UserInfo Contact | Not-Active | IPG:3 | SI:-1 | ID:19 | LastMOS:N/A | AvgMOS:N/A | MinMOS:N/A
*** All SBC AORs for AOR 1111:
1111
Displaying registration status of SBC users of AOR 12345@audiocodes.com enabled for MOS calculations:
 show voip register db sbc user 12345@audiocodes.com

*** SBC Registered Contacts for AOR 12345@audiocodes.com ***

===============================================================
<sip:12345@6t0ow5277pca.invalid;transport=ws>;+sip.ice;reg-id=1;+sip.instance="<urn:uuid:eae4b222-cae4-40a3-abbe-a384b87980fa>";expires=600 | IPG:0 | SI:0 | ID:0 | LastMOS:27(Gray) @ 00:00:00.000 | AvgMOS:N/A(Gray) | MinMOS:N/A(Gray)
*** All SBC AORs for AOR 12345@audiocodes.com: 12345@audiocodes.com, 12345, 12345^urn:uuid:eae4b222-cae4-40a3-abbe-a384b87980fa
Displaying port registration status:
show voip register ports
 
*** Ports Registration Status ***
 
Gateway      Port                Status
=================================================
Module 3     Port 1     FXO      REGISTERED
-------------------------------------------------
Module 3     Port 2     FXO      REGISTERED
-------------------------------------------------
Module 3     Port 3     FXO      REGISTERED
-------------------------------------------------
Module 3     Port 4     FXO      NOT REGISTERED
-------------------------------------------------
Module 5     Port 1     FXS      NOT REGISTERED
-------------------------------------------------
Module 5     Port 2     FXS      NOT REGISTERED
-------------------------------------------------
Module 5     Port 3     FXS      NOT REGISTERED
-------------------------------------------------
Module 5     Port 4     FXS      REGISTERED
Displaying detailed information about users in the Supplementary Services table:
show voip register suppserv gw list

*** GW Supp Serv Users Registration Status ***

Index   Type            Status          Contact ================================================= 1       EndPoint        NOT REGISTERED  sip:4000@10.15.7.96:5060